top of page

Tips and Advice for Doors and Windows

Types of Glazing: Which One Is Right for Your Windows?

Oct 15
6 min read



Types of Glazing: Which one is right for your windows?

Fogging between window panes, a cold room near the glass, or a patio door that lets in chilly air doesn't automatically mean everything needs to be replaced. Understanding the different types of window glazing can help you identify the source of the problem and choose a long-lasting solution without unnecessary expenses. In many homes throughout Greater Montreal, the window frame is still in good condition. It's often the sealed glass unit (thermos), weatherstripping, or hardware that needs attention.


The right glazing depends on the window's location, sun exposure, outdoor noise levels, and the actual condition of its components. Here's how to make an informed decision.


Single Glazing: Limited Performance


Single glazing consists of just one pane of glass. It's mainly found in older buildings, some storm windows, and secondary openings. Its biggest drawback is straightforward: it provides very little thermal insulation.


During winter, the interior surface of single-pane glass quickly becomes cold. This encourages condensation, creates discomfort near the window, and contributes to heat loss. Single glazing also allows more outdoor noise to enter compared to insulated glass units.

That doesn't mean every single-pane window needs to be replaced immediately. In some cases, targeted improvements to weatherstripping or window seals can help. However, for windows exposed to Quebec's harsh winters, single glazing is rarely the most efficient long-term solution.


The Most Common Types of Insulated Glass


Insulated glass, commonly called a sealed glass unit or thermos, consists of two or three panes separated by a hermetically sealed space. This space contains dry air or an insulating gas. The principle is simple: reduce heat transfer between the inside and outside of your home.


When a sealed glass unit loses its airtight seal, moisture can enter between the panes. The result is often visible: persistent fogging, whitish marks, water droplets, or a cloudy appearance that cannot be cleaned away. The problem is inside the sealed unit, not on the glass surface.


Double Glazing


Double glazing consists of two panes of glass. It's the most common type found in Quebec homes, condos, and smaller residential buildings. It provides significantly better insulation than single glazing, especially when it comes to comfort near windows.


However, its efficiency depends on several factors: the quality of the seal, the thickness of the space between the panes, the type of spacer, and whether the glass has an energy-efficient coating.


A double-glazed unit in good condition can still provide excellent performance. On the other hand, a fogged sealed unit cannot regain its clarity or original insulating properties through simple cleaning.


When the existing window frame is in good condition, replacing only the sealed glass unit is often a more economical and environmentally responsible solution than replacing the entire window.


This type of assessment helps homeowners avoid paying for work they don't actually need.

Triple Glazing


Triple glazing consists of three panes of glass separated by two insulating spaces. It generally provides greater thermal resistance and can further reduce the feeling of cold near windows.


It may be particularly beneficial for windows exposed to strong winds, large openings, or rooms where maintaining comfort during winter is difficult.

However, there are trade-offs. Triple-glazed units are heavier and thicker. They aren't compatible with every window frame, patio door, or hardware system. Installing heavier glass without considering the existing structure can interfere with the proper operation of the window.


Triple glazing isn't automatically the best choice.

If your problem comes from a failed sealed glass unit, worn weatherstripping, or a patio door that doesn't close properly, correcting the actual issue may provide more noticeable results than upgrading to a heavier glazing system.


Low-E Coatings and Insulating Gases: What Really Makes a Difference


Two windows that look identical can perform very differently. The coatings applied to the glass and the gas inside the sealed unit play an important role in energy efficiency.

Low-Emissivity Glass (Low-E)


A Low-E coating is an extremely thin, nearly invisible layer applied to one surface of the glass. Its purpose is to reduce radiant heat transfer.


During winter, it helps retain warmth inside your home. In summer, depending on the coating and window orientation, it can also reduce excessive solar heat gain.

Choosing the right Low-E glass depends on sun exposure.


A south-facing window behaves differently from a shaded or north-facing window. Glazing designed to maximize solar heat gain may be beneficial in certain situations but less desirable in a room that already overheats during the afternoon.


The goal isn't simply to choose the most advanced product available. It's to select glazing that addresses the actual problem in your home, whether that's discomfort, condensation, excessive heat, or privacy.


Argon and Krypton Gas


The space between glass panes may contain dry air, argon, or, less commonly, krypton.

Argon is widely used in energy-efficient insulated glass units because it slows heat transfer more effectively than air. It's colourless, odourless, and sealed inside the unit.


Krypton provides even better insulation in very narrow spaces, but it's generally more expensive. It isn't necessary for every window.


For most residential properties, a quality double-glazed unit with a Low-E coating and argon gas can offer an excellent balance between comfort, energy efficiency, and cost.

One important detail: when a sealed glass unit loses its airtight seal, the insulating gas can escape, reducing its intended performance. That's another reason not to ignore fogging between window panes.


Laminated, Tempered, and Frosted Glass: Choosing According to Your Needs


Insulation isn't the only factor to consider. Certain types of glass are designed to improve safety, resistance, or privacy.


Tempered glass is heat-treated to better withstand impacts. If it breaks, it shatters into small pieces that are generally less likely to cause serious cuts than ordinary glass. It's commonly used in areas where impact risks are higher, including certain patio doors and windows close to the floor.


Laminated glass consists of two layers of glass bonded together with an intermediate film. When it breaks, the fragments generally remain attached to this layer. Depending on its composition, laminated glass can improve security and help reduce outside noise.


Frosted, textured, or obscured glass allows natural light to enter while limiting visibility. It's an excellent option for homeowners who want more privacy without completely darkening a room.


These options address specific needs and don't necessarily replace high-performance insulated glazing. Instead, they can often be incorporated into an insulated glass unit.


How to Recognize When a Sealed Glass Unit Needs Replacing


Condensation on the interior surface of a window doesn't always mean the sealed glass unit is defective.


During extremely cold weather, high indoor humidity, poor air circulation, or curtains that remain closed can cause condensation to form on the inside surface of the glass.

In these situations, it's important to examine ventilation habits, indoor humidity levels, and the window's overall airtightness.


However, fogging trapped between the glass panes is a typical sign of seal failure.

Whitish marks, permanent cloudiness, and moisture streaks that cannot be reached or cleaned often confirm the problem.


A deteriorated spacer, a failed seal, or the natural aging of the unit may be responsible.

It's also important to inspect the condition of the window frame, glazing stops, weatherstripping, and hardware.


Installing a new sealed glass unit won't resolve an air leak caused by worn weatherstripping or a patio door that no longer closes properly.

An effective repair always begins with a complete assessment.


Making the Right Choice Without Replacing What Still Works


Before choosing among the different types of glazing, ask yourself three questions:

  • Where is the problem coming from?

  • Which component is actually responsible?

  • What improvement in comfort are you looking for?

A fogged sealed glass unit in a structurally sound window often calls for targeted glass replacement.

Air leaking around a door may simply require new weatherstripping or an adjustment.

A window that's difficult to open or close may have a hardware issue rather than a glazing problem.

At MMC Portes et Fenêtres, our approach is to evaluate what can be repaired before recommending a more expensive intervention.


It's a practical way to protect your property, reduce waste, and restore comfort without unnecessary replacement costs.

The right glazing should be something you barely notice: less fogging, less cold near your windows, a clear view, and windows that remain easy to operate, winter after winter.

Need Help With Your Window Glazing?


Are your windows foggy, letting in cold air, or showing condensation between the panes? You may not need to replace your entire windows!


At MMC Portes et Fenêtres, we specialize in replacing sealed glass units (thermos), repairing window mechanisms, adjusting doors and windows, and replacing worn weatherstripping.


Our priority is to repair what can be repaired and help you avoid unnecessary expenses.

We serve Montreal, Laval, the North Shore, and surrounding areas.


Contact us today for a free estimate!




Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page