top of page

Tips and Advice for Doors and Windows

7 Causes of Window Condensation

Oct 31
6 min read


7 causes of Window Condensation

Window condensation isn't always just a result of Quebec's cold winters. Understanding the 7 causes of window condensation can help determine whether the problem comes from indoor humidity, poor air sealing, or a sealed glass unit that has lost its efficiency. This distinction matters because a properly targeted repair can often solve the problem without unnecessary expenses.


Before taking action, pay attention to where the moisture appears. Small droplets on the interior surface of the glass don't require the same solution as a cloudy film trapped between two panes. That's where a proper diagnosis begins.


1. Excessive Indoor Humidity


During winter, warm indoor air contains moisture. When it comes into contact with a cold surface, such as window glass, it cools rapidly and releases water. It's the same phenomenon that causes condensation to form on a cold drinking glass in summer.

Cooking, showering, drying laundry, and even the people living in a home all contribute to indoor humidity. In a tightly sealed house, excess moisture can accumulate on windows, especially in the morning or during extremely cold weather.


The problem is often more noticeable in bathrooms, kitchens, and bedrooms. Proper ventilation can make a significant difference, but it's also important to maintain an indoor humidity level suited to outdoor temperatures.

When temperatures drop significantly, a humidity level that felt comfortable in the fall may become too high for your windows.


2. Insufficient Air Circulation Around the Window


Even when indoor humidity is reasonable, air needs to circulate around the glass.

Fully closed blinds, heavy curtains, furniture placed directly in front of a window, or blocked baseboard heaters can create pockets of cold air. Condensation then forms more easily along the bottom of the glass and around the frame.


This doesn't mean you need to remove your window coverings. The goal is simply to allow warm indoor air to reach the glass, particularly at night and during cold weather.

Opening blinds slightly or moving furniture a few centimetres away from the window can help reduce condensation.


If the fogging is light, temporary, and appears only on the interior surface, start by checking air circulation before assuming the window is defective.


3. Worn Weatherstripping or Poor Window Sealing


A window that allows cold air to enter becomes more difficult to keep warm. The glass cools down, the frame may feel icy to the touch, and condensation increases around areas that are no longer properly sealed.

There are several signs to watch for: noticeable drafts, increased outdoor noise, localized frost, water repeatedly appearing in the same corner, or significant condensation around the window sash.

Over time, weatherstripping can become compressed, hardened, torn, or detached. Worn hardware can also prevent the window from closing tightly enough to create a proper seal.

In these situations, replacing worn weatherstripping and adjusting the window hardware can often be effective solutions.

These repairs improve air sealing, reduce discomfort, and help protect the frame from repeated moisture exposure.

Why replace an entire window when the problem is limited to its sealing or closing components?

4. A Failed Sealed Glass Unit (Thermopane)

Condensation between two panes of glass is one of the clearest signs of a failed sealed glass unit, commonly called a thermopane.

You cannot wipe this moisture away from inside or outside the house because it is trapped between the panes.

Over time, the perimeter seal of a sealed glass unit can deteriorate. Moist air then enters the space between the panes, creating a cloudy white film, permanent marks, or water droplets inside the unit.

The glass also loses some of its insulating performance.


Replacing the sealed glass unit is generally the most practical solution when the window frame and operating mechanism are still in good condition.

This repair restores a clear view and improves thermal performance without unnecessarily replacing components that still work properly.


Interior Condensation vs. Condensation Between the Panes: The Essential Difference

Condensation on the interior surface of the glass usually indicates an imbalance between indoor humidity and glass temperature.

Condensation between the panes, on the other hand, generally indicates a failed seal in the sealed glass unit.


In the first situation, ventilation and window sealing should be evaluated. In the second, the sealed glass unit should be inspected by a specialist.


5. A Poorly Adjusted Window or Worn Hardware


A window may appear completely closed without properly compressing its seals.

A loose handle, worn locking mechanism, misaligned hinges, or an operating mechanism that no longer works smoothly can create a small, nearly invisible gap.

Even a minor opening can allow cold air to enter and contribute to condensation.

Avoid forcing a handle that resists movement. Doing so could further damage the mechanism or deform a component that might otherwise be repairable.


A professional adjustment can help assess closing pressure, sash alignment, and the condition of moving parts.


This type of inspection is especially useful when condensation is accompanied by a window that is difficult to lock, rubs when opening, or allows drafts during windy weather.


6. Water Accumulating in Window Tracks or Drainage Openings


Some windows have small drainage openings designed to manage water that reaches the tracks.


When these openings become blocked by dust, dirt, or debris, water can accumulate.

It may then seep into the frame, freeze during cold weather, or create the impression that the glass itself is producing excessive condensation.

Gently cleaning window tracks is part of regular maintenance.


However, avoid drilling, enlarging, or modifying drainage openings without understanding how the system is designed. An improper modification could redirect water toward the interior of the home.


If water continues to accumulate after cleaning, runs onto the windowsill, or leaves marks on the frame, further inspection is recommended.


The goal is to determine whether the issue comes from drainage, seals, window operation, or the sealed glass unit.


7. An Aging Window Frame or Glass Unit That Can Still Be Repaired


All windows age, but that doesn't automatically mean they need to be completely replaced.

Glass that no longer performs as efficiently, deteriorated seals, or worn hardware can cause recurring condensation even when the overall window structure remains sound.

The right solution depends on the actual condition of each component.


If the frame is stable, the window operates properly after adjustment, and the problem is limited to the sealed glass unit or weatherstripping, a targeted repair is often more economical and practical.


On the other hand, significant frame deterioration, persistent water infiltration, or multiple damaged components may require a more thorough assessment.

This is precisely why a proper diagnosis is better than making a replacement decision based on condensation alone.


Condensation is a symptom, not necessarily the underlying problem.


How to Reduce Window Condensation Right Away


Start by wiping away visible water from the windowsill and frame to prevent moisture from damaging finishes or encouraging mould growth.

Use bathroom and kitchen exhaust fans, especially during and after activities that generate steam.


Keep blinds slightly open during extremely cold weather to allow warm air to circulate around the glass.


Then monitor the situation over the next few days.

If condensation decreases after reducing indoor humidity and improving air circulation, the window itself may not be defective.


However, if moisture remains concentrated in one specific area, you notice cold drafts, or condensation appears between the panes, a targeted repair may be the most appropriate solution.


For homeowners in Montreal, Laval, and the North Shore, MMC Portes et Fenêtres can assess the condition of sealed glass units, weatherstripping, and window hardware to recommend an appropriate repair.


A clear, properly sealed window that opens and closes smoothly often starts with making the right repair in the right place.


Need Help With Your Windows?


Are your windows experiencing excessive condensation, fogging between the panes, or signs of cold air infiltration?


You don't always need to replace the entire window!


At MMC Portes et Fenêtres, we can replace defective sealed glass units, worn weatherstripping, and repair certain window mechanisms to help restore comfort and proper sealing, even during winter.


Get your estimate quickly, without an initial on-site assessment!


Simply complete our contact form, then send us your photos by following the instructions provided.


You'll generally receive your estimate within one business day, once we've received all the necessary information.


MMC Portes et Fenêtres — Proudly serving Montreal, Laval, and the North Shore and its surrounding areas.

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page